Space Heater Extension Cord: Why the Two Should Never Meet

Space heater extension cord: why the combination overheats, why your breaker will not catch it, and the safe way to run a heater this winter.

Space heater extension cord: why the combination overheats, why your breaker will not catch it, and the safe way to run a heater this winter.

Backstabbed outlets explained: why push-in connections loosen, the warning signs of a loose connection, and how an electrician fixes it for good.

IP rating explained: what the two digits mean, how IP compares with NEMA types and wet location listings, and eight mistakes that let water in.

Double insulated or grounded? How each protects you from a shock, how to recognize them, why polarized is not grounded, and six mistakes that remove the protection.

Two prong outlets tell you one thing right away: the wiring behind them was installed before grounding became standard in American homes, roughly before the early 1960s. The outlet still delivers power, your lamp still works, and yet every three…

GFCI requirements by room under the 2023 NEC, the appliances that now need GFCI protection, and the outdoor air conditioner deadline explained.

Bathroom electrical safety in the US protects device by device; Europe protects the whole room. What each system does better, and what to ask for when you remodel.

Hot tub wiring needs a dedicated circuit, GFCI protection and a disconnect at least 5 feet away. What the code requires and where installs go wrong.

If your house went up between about 1965 and 1973, there is a fair chance the wire behind your outlets is aluminum rather than copper. Somebody has probably already told you it needs to come out. An electrician, a home…

The short answer Wire derating is what happens between the number in the ampacity table and the number you are actually allowed to use. Bundle several current carrying conductors in one raceway and they cannot shed heat, so the allowed…